I don’t know enough to know what I don’t know, but the price seems pretty low even for a used 3d printer. Do the pictures or description give any indications?
If you’re new to 3d printing, I don’t recommend buying a used budget printer unless you have extreme tolerance for troubleshooting someone else’s problems.
They’re cheap enough new.
Solid advice above. 3d printing on these things is a huge issue initially. Set up etc is very fiddly. And this is with a new set up with everything documented by the manufacturer. As soon as you start playing with the mess others have made dealing with the same issues. More so after having dismantled and moved a set up to sell.
Really not a fun task for a first timer.
Once you have done it once and understand the issues involved and just how minor errors can mess with plate adhesive and other issues. It would be a fine purchase. But not that cheap. 1/2 price of a newer model seems normal.
But it is also worth remembering. While these printers are very upgradeable. The tech is changing fast. And this is the price range where an older printer is likely to have changed the most compared to newer models.
Agreed, these budget printers are a project in themselves. So if you’re into tinkering/modifying/upgrading it may be in your wheelhouse. If you want to get into 3D printing to pick a print off a website and have it print perfectly every time, this probably won’t be a good printer for you.
That being said, getting one of these project printers throws you in the deep end, you’ll learn more about 3D printing hardware, and at an incredibly deep level. If you stick with the hobby, everything after the initial learning curve will seem easy
It’s been modded, which is always a crapshoot. It could be a stellar printer, or they’re lying, or they think it prints amazballs, but has really low standards. Or it could be even more amazing and their standards are just straight up OCD.
From what they say, the mods are fairly common for creality printers.
It’s also super common to mod your printers, especially lower-end brands like reality.
I would suggest asking if they could do a test print- and give them the filament to do it with. Something like a Benchy won’t take too long, or too much filament. Also if it comes out nice ask for what they used as print settings.
If it prints well, 150 is a spectacular deal.
That said, I wouldn’t suggest entering non a used printer. Too many things to go wrong. (I’d also suggest avoiding the lowest end of printers.)
Checked the Crealty site and the newer version of that model is $289. Doesn’t seem out of sorts for price of a used printer at all. That said, I am not an expert, but just someone interested in getting into this too.
Used printers often require fixes that require you to be knowledgeable in to fix.
I recommend Bambu printers if you wanna dip your toes in the hobby. They’re locked down quite a bit but they just work. I think the A1 mini is excellent.
