They must have put a timer in it.

  • NotSteve_@lemmy.ca
    link
    fedilink
    arrow-up
    9
    ·
    23 hours ago

    Wait, how hard is that? I always figured TVs were one of the least fixable electronics

      • PoliteDudeInTheMood@lemmy.ca
        link
        fedilink
        arrow-up
        2
        ·
        4 hours ago

        The board capacitors aren’t the scary part; the flyback transformer circuit is.

        A large CRT acts like a giant glass capacitor holding upwards of 30,000 volts right under that rubber anode suction cup. If you skip discharging it to the ground strap with a proper high-voltage probe, it will happily send you across the room.

    • hperrin@lemmy.ca
      link
      fedilink
      English
      arrow-up
      13
      ·
      22 hours ago

      It is not easy, and requires one piece of special equipment. You have to buy suction cups to lift the glass and screen up, as well as the replacement LED strips and diffuser lens things. My dad and I fixed it together using a queen size bed as a work space. We had barely enough room for everything. There are a lot of steps, because you basically have to take apart the entire TV to get to the backlight (the one part that is guaranteed to fail and need replacing). We watched or read (I can’t remember) a tutorial on how to do it that was for an almost identical model. Overall, it took us about two hours to complete. But, that TV is still going strong. I’m currently watching it now. :)