Zipper merging also always seems to assume that there are no trucks/buses/trailers and that everyone isn’t tailgating so closely that they can read the Vin# of the car in front of them…

I was referring to the waveyness in the center, though the warping on the esges is partly caused by both the oils and the cooling shrinkage, I believe.

The uniform buckling of the layer in the middle of the sheet is what I’m leaning on, but I don’t believe that your fan speed is too high, or there would be more seperation between layers as the filament would cool too much before adhering to the layer below.

I believe there are test STLs that assist in Dialing in your settings for printing plates in particular, but I’m avoiding printing surfaces that large until I get an enclosure built.

I’d say your print time per layer might be too high, aince the filament looks to be contracting off of the plate as it cools. I’d see if there was a way to speed-up the print time of each layer, or break up the plate’s large surface area with holes or other features to dissapate the stress as it cools.

“Dicks out for Jesus Any%” runs, when?

It’s a Chiaotzu!

https://youtu.be/g4GUq60CNeI?t=17

Nothing says “Death Cult” quite like the prominant display of the murder weapon used against their leader.

It’s almost like it’s a suicidal death-cult.

I mean, the Israelis kind of had something similar for a bunch of pagers, but instead of bricking the device, they just violently exploded.

Pretty sure most of the Walking Dead cast would never have survived an initial outbreak of gingivitis, let alone zombies…

If the insurance firm has a lot of money to throw at constant adds, then odds are good that they aren’t paying out premiums for their customers.

They were always sacrificial pawns. The administration has been salivating over one of them getting killed so that they can invoke Artical 2 and call for martial law.

Text has been a little sluggish with my tests. Might be due to influx of users, though.

It’s quite warm on/near the Pacific right now.

Hate week is a time-honored tradition!

You laugh, but the engineroom guys refer to the reactor as a “Hot-rock” diety.

Loot/Blind boxes are like a random pack of baseball cards that you can only show to other owners of baseball cards, or someone who is baseball-card adjacent.

Some of them are “rare” in the sense that the card printing company refuses to make more, despite it costing them nothing after the initial card is made.

What’s more is that the printing compamy has decades of psycologic practices to use on their card pack purchasers. For Example:

• Casino-esque animations, enticing younger collectors before that aren’t even allowed to gamble legally, in person.
• Rarity manipulation, making things rarer than listed. If they list anything more than ‘trust me bro.’
• Making sure that purchasers are surrounded by pack buyers who have already got the rarer cards, generating card envy.
• Removing entire card sets from purchase wirh the whole purpose of making purchasers feel like they will miss out, right now and forever, if they do not buy more packs of cards.

Finally, there is also the fact that all of these cards are entirely digital, so the existance of the cards depend almost entirely on the whims of the printers.

The one that upped it by 30% worked for me on a Steam Deck. I can’t parry everything, but i can at least hit the parry now.

All images of trump make him look bad…

At least Germany got a WW1 vet. We got a bloated real estate developer. con artist.

Ftfy