The USB onboard controller on my ASUS Crosshair VI seems to have busted on me. That being said, it would seem I’m now in the market for a new MB.
I haven’t been keeping up with the industry and my MB crash is a bit unexpected, so I’m coming into this a bit blind. Looking for advice or feedback from your own experiences.
I have the following components:
- 2 x 16 gb 288 pin 3600 DDR4 SDRAM G.Skill Trident Z Neo
- EVGA FTW3 RTX 3080Ti
- AMD Ryzen 7 3700X 8-core/16thread
- Seasonic - PRIME TX-1000 80+ Titanium PSU
Looking for suggestions. Not sure if it’d be better to get a new CPU and MB or continue with the current setup with a new MB. I’m also vibing with MBs that have very little to no RGB, I’m a bit RBG’d out.
Appreciate any help or advice
(Edit: added PSU)
I thought of this, but I’m frozen on the bios splash screen with or without USB peripherals plugged in.
I get error 98 in boot with any USB device plugged in, which I think means USB init starts, but hangs during enumeration.
If i remove all usb devices it hangs on at D7, which i think means that USB init completes, no input found.
The fact that it’s not moving past BIOS splash screen is concerning and leads me to think this won’t be a viable solution. I’d imagine that the board will still try onboard USB first and hang before they ever reach the PCIe card. I did some other troubleshooting, at this point I’ve accepted that the board is toast.
Ah yeah that does sound pretty borked.
Does it get far enough to start a flash update?
Or even, have you tried to reset the bios?
I’ve had similar experiences in the distant past where a fresh bios helped.
It does, I’ve reflashed the bios a few times and rolled back to 4 different versions. No luck.
Ah stink.
I’d try for just getting a new MB. At least at first. You might even get away with an mATX or ITX board and save a few $.
If you do decide to rebuild a new machine, then at least you’ll have a functioning machine to re-purpose.