minus-squareSharkyPants@lemmy.worldOPtohomeassistant@lemmy.world•A different option for the Ikea Vindritning air quality sensorlinkfedilinkEnglisharrow-up1·edit-21 year agoSame thing here. Using ESPHome almost identical config from the tutorial except for my wifi secrets. If anyone is interested here is the ESPHome config I arrived on: substitutions: name: "vindriktning_01" friendly_name: "vindriktning 01" project_name: "ikea.vindriktning-sensor" ota: password: !secret freindly_password wifi: ssid: !secret wifi_ssid password: !secret wifi_password # Enable fallback hotspot (captive portal) in case wifi connection fails ap: ssid: "Ikea-Vindriktning-01" password: !secret freindly_password ap_timeout: 30s esphome: name: "${name}" project: name: "${project_name}" version: "1.0" esp8266: board: esp01_1m # Enable logging logger: baud_rate: 0 # Enable Home Assistant API api: uart: rx_pin: GPIO2 baud_rate: 9600 sensor: - platform: pm1006 pm_2_5: name: "Particulate Matter 2.5µm Concentration" web_server: port: 80 local: true linkfedilink
SharkyPants@lemmy.world to homeassistant@lemmy.worldEnglish · 1 year agoA different option for the Ikea Vindritning air quality sensorplus-squarelemmy.worldimagemessage-square7fedilinkarrow-up15arrow-down10
arrow-up15arrow-down1imageA different option for the Ikea Vindritning air quality sensorplus-squarelemmy.worldSharkyPants@lemmy.world to homeassistant@lemmy.worldEnglish · 1 year agomessage-square7fedilink
Same thing here. Using ESPHome almost identical config from the tutorial except for my wifi secrets.
If anyone is interested here is the ESPHome config I arrived on:
substitutions: name: "vindriktning_01" friendly_name: "vindriktning 01" project_name: "ikea.vindriktning-sensor" ota: password: !secret freindly_password wifi: ssid: !secret wifi_ssid password: !secret wifi_password # Enable fallback hotspot (captive portal) in case wifi connection fails ap: ssid: "Ikea-Vindriktning-01" password: !secret freindly_password ap_timeout: 30s esphome: name: "${name}" project: name: "${project_name}" version: "1.0" esp8266: board: esp01_1m # Enable logging logger: baud_rate: 0 # Enable Home Assistant API api: uart: rx_pin: GPIO2 baud_rate: 9600 sensor: - platform: pm1006 pm_2_5: name: "Particulate Matter 2.5µm Concentration" web_server: port: 80 local: true