one of the ports on my m2 to sata adaptor board died. The board is super flimsy and all 6 ports are loose and wiggly. does anyone have as suggestion for an M2 to sata board that doesnt suck? They all seem to have the same problem.
You must log in or register to comment.
I’ve been through this, and they all suck.
I’ve been using an MT1064 - based one with an 8087 connector to save the wear and tear of multiple connectors. It’s definitely a better physical connection, but the performance is abysmal.
What’s you use case here? If you just need more ports for data drives and have a free pcie slot a used SAS HBA cards and use breakout cables to give you a bunch more data ports. These are very durable cards.
mini home server based on an orange pi 5 plus. I have 2 M2 slots available, and I’m trying to use the M2 M-key slot for this. there are no full pcie slots on this board.
What version and how many lanes does the Orange Pi have in that slot?
PCIe 3 x4 on the M-key, PCIE2 x1 on the E-key
I have one installed on a raspberry pi 5 with NVMe adaptor.
Some mainboards have very few PCI-e slots.
I ended up with a similar adapter because the onboard SATA on my board was flaky with optical drives and I rip CDs.
