“Seven songs were played while the group was blindfolded and the cables swapped back and forth. Not only “after 5 tests, none could determine which was the Monster 1000 cable or the coat hanger wire,” but no one knew a coat hanger was used in the first place.”
That’s a classic and I am glad it see it passed around again. The best part is the people that start delving into the snake oil absurdity that is “audiophile cables” before, you know, getting better actual speakers/headphones. Like for fucks sake, your $200 fancy cable isn’t going to make your bullshit bargain bookshelf speaker into the voice of god. Just get some half way decent equipment and listen to your actual music.
Yup, there is a lot of snake oil in the audiophile world. The worst instance I saw was someone posting about an intermittent buzz in their system. Multiple people were recommending a full rebuild, (which would cost thousands of dollars). From what they described, it was pretty obvious that OP just needed a ~10¢ ferrite bead on a power cable, to make it stop acting as an antenna.
I was like “okay, you could try rebuilding your entire system like everyone else is suggesting… But maybe start with a ferrite bead. Here is a link for a multipack on Amazon. Worst case scenario, you’re only out like $5. And even if it doesn’t fix this specific case, the multipack is handy to have around anyways, because manufacturers often cheap out and skip adding them when their devices really do need them.” Like three days later, I got a “holy shit this actually worked. You just saved me thousands of dollars (and a ton of time) on a complete rebuild.”
Installing cable TV at a man’s house, ripped his Monster coax connector off. He was appalled! (I was appalled!) Showed him what I was replacing it with. Parts guide.
“The shield is quad-woven steel. Yours was 1x of angel hair copper. The dielectric is solid, not a noodle. See? (bendy, bendy) Foil shield? Uh, did yours have one? Oh, I see the shredded bit right there!”
Bent the center conductor on his Monster cable with my pinky. “Try that with mine.” Stopped him before he hypodermic-needled himself.
tl;dr: Whatever the cable guy cuts for you is miles above Monster grade.
It’s like Yeti gear. “So you paid $35 for a cup that’s simply a vacuum sealed canister? I got a 6-pack off Amazon for $25. Cute colors too!”
My favorite story along these lines…
Someone compared Monster cables to un-bent coat hangers.
https://gizmodo.com/audiophile-deathmatch-monster-cables-vs-a-coat-hanger-363154
“Seven songs were played while the group was blindfolded and the cables swapped back and forth. Not only “after 5 tests, none could determine which was the Monster 1000 cable or the coat hanger wire,” but no one knew a coat hanger was used in the first place.”
That’s a classic and I am glad it see it passed around again. The best part is the people that start delving into the snake oil absurdity that is “audiophile cables” before, you know, getting better actual speakers/headphones. Like for fucks sake, your $200 fancy cable isn’t going to make your bullshit bargain bookshelf speaker into the voice of god. Just get some half way decent equipment and listen to your actual music.
Yup, there is a lot of snake oil in the audiophile world. The worst instance I saw was someone posting about an intermittent buzz in their system. Multiple people were recommending a full rebuild, (which would cost thousands of dollars). From what they described, it was pretty obvious that OP just needed a ~10¢ ferrite bead on a power cable, to make it stop acting as an antenna.
I was like “okay, you could try rebuilding your entire system like everyone else is suggesting… But maybe start with a ferrite bead. Here is a link for a multipack on Amazon. Worst case scenario, you’re only out like $5. And even if it doesn’t fix this specific case, the multipack is handy to have around anyways, because manufacturers often cheap out and skip adding them when their devices really do need them.” Like three days later, I got a “holy shit this actually worked. You just saved me thousands of dollars (and a ton of time) on a complete rebuild.”
Installing cable TV at a man’s house, ripped his Monster coax connector off. He was appalled! (I was appalled!) Showed him what I was replacing it with. Parts guide.
“The shield is quad-woven steel. Yours was 1x of angel hair copper. The dielectric is solid, not a noodle. See? (bendy, bendy) Foil shield? Uh, did yours have one? Oh, I see the shredded bit right there!”
Bent the center conductor on his Monster cable with my pinky. “Try that with mine.” Stopped him before he hypodermic-needled himself.
tl;dr: Whatever the cable guy cuts for you is miles above Monster grade.
It’s like Yeti gear. “So you paid $35 for a cup that’s simply a vacuum sealed canister? I got a 6-pack off Amazon for $25. Cute colors too!”
$35 is generous
Been 15-years ago, but I bet an audiophile coworker, who had a physics degree, he couldn’t tell the difference in a coat hanger and proper wires.
“Well, yeah, but, bla, bla, bla…”
Now I wish I could shove that article up his butt! 😈
To be fair, it was 4 coat hangers. The Monster cable was therefore outnumbered.